Tensile properties in the oriented blends of high-density polyethylene and isotactic polypropylene obtained by dynamic packing injection molding

In this article, tensile properties have been discussed in terms of phase morphology, crystallinity and molecular orientation in the HDPE/iPP blends, prepared via dynamic packing injection molding, with aid of scanning electron microscopy (SEM), differential scanning calorimetry (DSC) as well as two dimensional X-ray scattering (2D WAXS). For the un-oriented blends, the tensile properties (tensile strength and modulus) are mainly dominated by the phase morphology and interfacial adhesion related to the influenced crystallization between HDPE and iPP component. A maximum in tensile strength and modulus is found at iPP content in the range of 70-80 v/v%. As for the oriented blends, however, the presence of dispersed phase in the blends, independent of phase morphology and crystallinity, always makes tensile properties to be deteriorated through reducing molecular orientation of matrix. It is molecular orientation of matrix that determines the tensile properties of oriented blends. In the blends with HDPE as matrix, steep decreasing of tensile properties is related to the rapid reducing of molecular orientation of HDPE, whereas in the blends with iPP as a major component, slight decreasing of molecular orientation of iPP results in slight reducing of tensile properties. Other factors, such as interfacial properties and phase morphology, seem to be little contribution to the modulus and tensile strength.