Preparation of a TiMEMO nanocomposite by the sol–gel method and its application in coloured thickness insensitive spectrally selective (TISS) coatings

An organic–inorganic nanocomposite was prepared via sol–gel processing from 3-(trimethoxysilyl)propyl methacrylate (MAPTMS) and titanium(IV) isopropoxide (TIP) precursors (TiMEMO) in the form of a viscous resin, and used as a binder for the preparation of coloured thickness insensitive spectrally selective (TISS) paints and corresponding solar absorber coatings. The spectral selectivity of TiMEMO-based TISS paints was optimized by varying the concentrations of binder and different pigments: black, coloured (red, green and blue) and aluminium flakes, the latter imparting low thermal emittance, which was correlated to the presence of titanium in the TiMEMO sol–gel host. The formation and the ensuing structure of the sol–gel TiMEMO hybrid was studied in detail and the nanocomposite structure of the TiMEMO binder formed was assessed from infrared and ²⁹Si NMR measurements, which confirmed the formation of Ti–O–Si linkages established after the hydrolysed precursors condensed into a compliant resinous material. XRD measurements provided additional information about the existence of small coherent domains of silsesquioxane units in the sol–gel host. The abrasion resistance of the non-pigmented TiMEMO binder deposited in thin film form on a PMMA substrate was assessed by the Taber test, and its hardness compared with other resin binders which have been used for making TISS paint coatings. The surface properties of the non-pigmented TiMEMO binder and the ensuing TISS paint coatings were determined from contact angle measurements. The results showed that the water contact angles of non-pigmented TiMEMO binder increased from 70° to 125–135° for the corresponding pigmented TISS paint coatings, inferring the influence of surface roughness on surface energy in the presence of pigments. SEM measurements revealed a striking similarity in the surface morphology of the TISS paint coatings with some other surfaces exhibiting the Lotus effect.