首页 | 本学科首页   官方微博 | 高级检索  
     

凸轮激波摆动活齿传动齿形及啮合力分析
引用本文:李剑锋,董新蕊,周丽艳.凸轮激波摆动活齿传动齿形及啮合力分析[J].北京工业大学学报,2008,34(1):7-13.
作者姓名:李剑锋  董新蕊  周丽艳
作者单位:北京工业大学北京市先进制造技术重点实验室,北京,100022;北京工业大学北京市先进制造技术重点实验室,北京,100022;北京工业大学北京市先进制造技术重点实验室,北京,100022
基金项目:国家自然科学基金,北京市自然科学基金,北京工业大学研究生科技基础资助项目
摘    要:为研究凸轮激波摆动活齿传动啮合副受力情况,根据其传动原理得到了中心内齿轮的理论、工作齿形方程.基于弹性小变形及变形协调建立了理想状态下的啮合副受力模型,给出了啮合副作用力的搜索算法,并结合具体实例分析,初步获得了凸轮激波摆动活齿传动的啮合副作用力分布趋势.

关 键 词:摆动活齿传动  凸轮激波  齿形方程  啮合力
文章编号:0254-0037(2008)01-0007-07
收稿时间:2006-08-29
修稿时间:2006年8月29日

Tooth Profile and Meshing Force Analysis of the Swing Movable Tooth Transmission Actuated by Cam
LI Jian-feng,DONG Xin-rui,ZHOU Li-yan.Tooth Profile and Meshing Force Analysis of the Swing Movable Tooth Transmission Actuated by Cam[J].Journal of Beijing Polytechnic University,2008,34(1):7-13.
Authors:LI Jian-feng  DONG Xin-rui  ZHOU Li-yan
Abstract:In order to investigate meshing force of the swing movable tooth transmission actuated by cam,aca- demic and work tooth profile equations of the central inner gear are deduced based on its transmission princi- ple.According to the suppose of stretch small distortion and distortion congruity,the model and algorithm of meshing force analysis under theoretic meaning are proposed,the presented method is illuminated through an example of meshing force calculation,and the distributing tendency of meshing force of this type of transmis- sion device is assumably acquired.
Keywords:swing movable tooth transmission  cam actuating  profile equations  meshing force  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号