| 滚子的直动从动件盘形凸轮机构设计 |
| |
| 引用本文： | 夏尊凤.滚子的直动从动件盘形凸轮机构设计[J].机电产品开发与创新,2005,18(1):42-43. |
| |
| 作者姓名： | 夏尊凤 |
| |
| 作者单位： | 长沙大学,工程系,湖南,长沙,410003 |
| |
| 摘 要： | 对滚子直动从动件盘形凸轮机构各构件进行了受力分析后,得出基圆半径的大小不仅影响传力特性,还影响滚子是否能做连续滚动的结论。当凸轮机构主要用于传递运动时,基圆半径的选择可使滚子做连续滚动为优先考虑条件。
|
| 关 键 词： | 凸轮机构 滚动 基圆半径 |
| 文章编号： | 1002-6673(2005)01-042-02 |
| 修稿时间： | 2004年9月7日 |
The Considering to the Design of the Disk Cam with Direct-Moving-roller Follower |
| |
| XIA Zun-Feng.The Considering to the Design of the Disk Cam with Direct-Moving-roller Follower[J].Development & Innovation of Machinery & Electrical Products,2005,18(1):42-43. |
| |
| Authors: | XIA Zun-Feng |
| |
| Abstract: | After analyseing the force of all the component in the cam with Direct-Moving-roller follower, the conclusion is gained that radius of base circle not only influence the ability of sending force, but also influence the roller's continuous rolling. When the cam is chiefly transferred movement, the choice of radius of base circle firstly is considered the roller's continuous rolling. |
| |
| Keywords: | cam mechanism rolling radius of base circle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
