Analysis of CO2 emissions reduction potential in secondary production and semi-fabrication of non-ferrous metals

Industrial sector growth in developing countries requires the provision of alternatives to guarantee sustainable development. Improving energy efficiency and fuel switching are two measures to reduce CO₂ emissions in the industrial sector, with natural gas and low-carbon electricity as the most feasible options in the short term. In this work, a linear programming optimization model has been developed to study the potential of energy efficiency improvement and fuel substitution for CO₂ emissions reduction, at national level in the non-ferrous metals industry. The energy resource/end-use device allocation problem in secondary metal production and semi-fabrication has been modeled. Using this model, the particular case of Colombia, where low-carbon electricity is available, has been studied. By improving energy efficiency, energy use and CO₂ emissions can be reduced significantly, 73% and 72%, respectively, at negative costs. Further CO₂ emissions reductions, up to 88%, are possible with fuel switching to low-carbon electricity, increasing the costs for the energy system; however, cost reductions caused by energy efficiency improvement outweigh cost increments of fuel switching. Benefits achieved with fuel substitution using low-carbon electricity can be lost if hydropower is not available; in such a case, efficient natural gas-fired end-use devices are preferable.