| 基于STM32的高精度扭矩测量系统设计 |
| |
| 引用本文： | 王金全,王小鹏,于挥. 基于STM32的高精度扭矩测量系统设计[J]. 传感器与微系统, 2015, 0(4): 99-101. DOI: 10.13873/J.1000-9787(2015)04-0099-03 |
| |
| 作者姓名： | 王金全 王小鹏 于挥 |
| |
| 作者单位： | 兰州交通大学 电子与信息工程学院,甘肃 兰州,730070 |
| |
| 基金项目： | 甘肃省科技支撑计划资助项目(1204GKCA051)；兰州市科技发展计划资助项目 |
| |
| 摘 要： | 为提高测控应用中扭矩测量精度，提出了一种基于STM32的高精度扭矩测量设计方案。首先，扭矩传感器输出信号经过低通滤波后，送入内置PGA的24位高精度Σ-ΔA/D转换器ADS1255。然后，主控制器STM32通过SPI读取A/D转换结果，通过移动加权平均滤波算法消除随机干扰噪声，进而计算扭矩值，将测量结果存储在外部FLASH并送LCD实时显示。现场测试结果表明：系统精度达到0.6%F. S.。
|
| 关 键 词： | 扭矩测量 STM32 A/D转换 移动加权平均滤波 |
Design of high-precision torque measurement system based on STM32 |
| |
| WANG Jin-quan,WANG Xiao-peng,YU Hui. Design of high-precision torque measurement system based on STM32[J]. Transducer and Microsystem Technology, 2015, 0(4): 99-101. DOI: 10.13873/J.1000-9787(2015)04-0099-03 |
| |
| Authors: | WANG Jin-quan WANG Xiao-peng YU Hui |
| |
| Abstract: | To improve precision of torque measurement in monitoring and control applications,a high-precision torque measurement design scheme based on STM32 is proposed. First,output signal of torque sensor is sent to ADS1255 which is a 24 bit,high-precision,built-in PGA,Σ-Δ A/D converter after low-pass filtering. Then,the master controller STM32 reads A/D conversion result by SPI and calculates the torque values by moving weighted average filtering algorithm to eliminate random noise. Finally,these values can be stored in an external Flash memory and be send to LCD to display in real-time. Site measuremental result indicates that precision of system reaches 0. 6%F. S. . |
| |
| Keywords: | torque measurement STM32 A/D conversion moving weighted average filtering |
| 本文献已被 万方数据 等数据库收录！ |
