| 激光切割机用横梁的无模铸造工艺优化设计研究 |
| |
| 引用本文： | 王怡飞,单忠德,杨浩秦,宋亚星.激光切割机用横梁的无模铸造工艺优化设计研究[J].铸造技术,2020(3):248-251. |
| |
| 作者姓名： | 王怡飞 单忠德 杨浩秦 宋亚星 |
| |
| 作者单位： | 机械科学研究总院集团有限公司先进成形技术与装备国家重点实验室 |
| |
| 基金项目： | 国家杰出青年科学基金资助项目(51525503)。 |
| |
| 摘 要： | 激光切割机作为现代机械加工中重要的特种加工设备,其Y轴横梁结构复杂,制造难度大。为避免横梁结构砂铸过程中出现气孔、缩松、浇不足等缺陷,设计了双侧底注式浇注系统。结果表明,采用无模铸造成形技术设计了铸造型芯,采用Procast软件仿真优化了浇冒口工艺,最终确定了激光切割机横梁的铸造工艺方案。
|
| 关 键 词： | 铸造工艺 无模铸造 建模仿真 |
Research on Optimization Design of Moldless Casting Process for Beams Used in Laser Cutting Machines |
| |
| WANG Yifei,SHAN Zhongde,YANG Haoqin,SONG Yaxing.Research on Optimization Design of Moldless Casting Process for Beams Used in Laser Cutting Machines[J].Foundry Technology,2020(3):248-251. |
| |
| Authors: | WANG Yifei SHAN Zhongde YANG Haoqin SONG Yaxing |
| |
| Affiliation: | (State Key Laboratory of Advanced Forming Technology and Equipment,China Academy of Machinery Science and Technology Group Co.,Ltd.,Beijing 100083,China) |
| |
| Abstract: | Laser cutting machine was an important special processing equipment in modern machining.The Y-axis beam was complex and difficult to manufacture.In order to avoid the defects such as porosity,shrinkage and loose,and insufficient pouring in the process of sand casting of beam structure,a two-side bottom pouring system was designed.The results show that the casting core is designed by the model-free casting technology,the casting riser process is optimized by Procast software simulation,and the casting process scheme of the beam of the laser cutting machine is finally determined. |
| |
| Keywords: | casting process patternless casting modeling and simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
