| 护栏梁斜向多孔浮动冲模设计 |
| |
| 引用本文： | 夏华,张鹏,詹捷,田平. 护栏梁斜向多孔浮动冲模设计[J]. 模具工业, 2004, 0(12): 27-30 |
| |
| 作者姓名： | 夏华 张鹏 詹捷 田平 |
| |
| 作者单位： | 重庆工学院,重庆,400050 |
| |
| 摘 要： | 分析了护栏梁零件的成形工艺特点 ,以护栏梁为例 ,在较小的空间位置条件下 ,通过摆块机构 ,以浮动模具的形式 ,实现多孔斜向冲裁 ,并对模具关键零件的加工制造工艺进行了全面分析 ,确保了模具开发的成功
|
| 关 键 词： | 浮动冲模 护栏梁 工艺分析 模具制造 摆块机构 |
| 文章编号： | 1001-2168(2004)12-0027-04 |
| 修稿时间： | 2004-07-01 |
A Floating Die for Slantwise Piercing Multiple Holes in the Fencing Rails |
| |
| XIA Hua,ZHANG Peng,ZHAN Jie,TIAN Ping. A Floating Die for Slantwise Piercing Multiple Holes in the Fencing Rails[J]. Die & Mould Industry, 2004, 0(12): 27-30 |
| |
| Authors: | XIA Hua ZHANG Peng ZHAN Jie TIAN Ping |
| |
| Abstract: | The characteristics of the technological process for forming the fencing rail parts are analyzed. With the fencing rail as an example, multi-hole slantwise piercing has been realized with a floating die with a swaying block structure under the condition of small space. The machining technologies of the key parts of the die are fully analyzed. The development of the die is successful. |
| |
| Keywords: | floating die fencing rail technology analysis die manufacturing swaying-block structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
