| Abstract: | The effect of liquid-metal embrittlement in lead melt is typical of Kh12MVSFBR ferrite-martensitic steel and is observed in the temperature range of 300 – 500°C at a deformation rate of 8 · 10–4 sec–1. The maximum decrease in the plasticity of tempered specimens occurs at a temperature of 450°C. A decrease in the amount of  -ferrite in the composition (martensite hardening without high-temperature annealing) results in a substantial decrease in plasticity and in broadening of the temperature range of embrittlement. 08Kh16N11S3MB austenitic steel is not affected by liquid metal embrittlement in the investigated temperature range for the deformation rates under consideration.Karpenko Physicomechanical Institute, Ukrainian Academy of Sciences, L'viv. Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 30, No. 4, pp. 71–76, July – August, 1994. |
