Behaviour of metal powders during cold and warm compaction

Abstract

An instrumented die was used to investigate the behaviour of metal powders during cold (ambienttemperature) and warm (up to 140^°C) compaction. This instrument enables simultaneousmeasurement of density, die wall friction coefficient, the triaxial stresses acting on the powderduring the course of compaction and ejection pressure. Commercial iron, titanium, aluminium,316L stainless steel (SS) and aluminium–silicon powders were employed for investigation. Theresults demonstrated the advantages of powder preheating on the compaction behaviour of metalpowders concerning green density, dimensional changes, frictional behaviour, ejectioncharacteristics and compactibility. However, the outlines also determined that the response ofthe non-ferrous powders to powder preheating is somehow different from those of the ferrouspowders. In this context, the behaviour of prealloy aluminium–silicon powders during compactionwas found of particular interest, as their compactibility is strongly affected by powder preheating,whereas the dimensional changes after ejection decrease considerably. This article presents theeffect of cold and warm compaction on the consolidation and ejection characteristics of ferrousand non-ferrous metal powders. The influence of compaction condition (pressure andtemperature) with considering of the powder characteristics and densification mechanisms areunderlined.