Arc heating hot wire assisted arc welding technique for low resistance welding wire

Abstract

An assistant arc was used to preheat the wire for hot wire tungsten inert gas (TIG) welding which was independent on the resistance of the welding wires and avoided the drawbacks of the traditional hot wire preheating method. The new method is suitable for low resistance wire such as copper and aluminium. The experimental results showed that the wire temperature varied linearly with preheating current and hyperbolically with wire feeding speed. The temperature of wires achieved 60% of their melting points when LF6, H90, HS201 and H08Mn2Si welding wires were used at a current less than 50 A. With arc assisted hot wire, the welding deposition efficiency of the HS201 wire was increased by 96% compared with the traditional TIG welding method, while its microstructure was similar to that of the cold wire welding.