Finite element analysis of effect of electrode pitting in resistance spot welding of aluminium alloy

Abstract

The effect of electrode pitting on the formation of the weld nugget in resistance spot welding of an aluminium alloy was investigated using the finite element method. Pitted electrodes were simulated by assuming a pre-drilled hole of varying diameter at the centre of the electrode tip surface. The results showed that a small pitting hole would not have a detrimental influence on the nugget size. The actual contact area at the electrode/sheet interface did not change significantly when the diameter of the pitting hole was increased. However, a large pitted area at the electrode tip surface resulted in a greatly increased contact area and hence reduced current density at the sheet/sheet interface, which in turn led to the formation of an undersized weld nugget. The numerical calculation of the nugget shape and dimensions agreed well with experimental observations.