| 硅胶模具浇注成形用聚氨酯树脂 |
| |
| 引用本文： | 闫春泽,史玉升,杨劲松,黄树槐. 硅胶模具浇注成形用聚氨酯树脂[J]. 材料科学与工艺, 2009, 17(1): 145-148 |
| |
| 作者姓名： | 闫春泽 史玉升 杨劲松 黄树槐 |
| |
| 作者单位： | 华中科技大学,塑性成形模拟及模具技术国家重点实验室,湖北,武汉,430074 |
| |
| 基金项目： | 国家科技型中小企业技术创新基金 |
| |
| 摘 要： | 利用二苯基甲烷二异氰酸酯(MDI)、聚醚多元醇及小分子扩链剂、交联扩链剂合成了一系列适用于快速硅胶模具浇注成形的二组分聚氨酯(PU)树脂.通过粘度测试考察了PU树脂的浇注性能,使用示差扫描量热分析(DSC)和热重分析(TGA)分析了树脂的热性能,并对其相关的力学性能进行了分析测试.结果表明,PU树脂两组分及其混合液的粘度较小,釜内寿命适中,浇注性能优良;通过调节硬段含量及混和扩链交联剂中三羟甲基丙烷(TMP)含量,使得PU树脂具有较高的力学性能和热性能,浇注成形件可在高负荷、高温下的使用.
|
| 关 键 词： | 快速成形技术 快速模具制造技术 硅胶模具 真空浇注 聚氨酯树脂 |
Polyurethane resin for silicone rubber mold casting |
| |
| YAN Chun-ze,SHI Yu-sheng,YANG Jin-song,HUANG Shu-huai. Polyurethane resin for silicone rubber mold casting[J]. Materials Science and Technology, 2009, 17(1): 145-148 |
| |
| Authors: | YAN Chun-ze SHI Yu-sheng YANG Jin-song HUANG Shu-huai |
| |
| Affiliation: | State Key Laboratory of Plastic Forming Simulation and Die and Mould Technology;Huazhong University of Science and Technology. Wuhan 430074;China |
| |
| Abstract: | A series of two-ingredient vacuum casting polyurethane resin(PU) for silicone rubber mold casting were synthesized from diphenylmethane diisocyanate(MDI),polyol,chain extender and crosslinking agent. The effects of hard segment content and hard segment structure on mechanical and thermal properties of PU were systematically investigated by mechanical property test and analyzed using differential scanning calorimetry(DSC) and thermogravimetry(TGA). It is found that PU not only has high tensile strength,flexu... |
| |
| Keywords: | rapid prototyping rapid tooling silicone rubber mold vacuum casting polyurethane resin |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
