|
|||||
|
|
| 注塑机温度控制方法研究 | |
| 引用本文： | 张开生,吕银芳,王雪梅.注塑机温度控制方法研究[J].工程塑料应用,2007,35(7):72-75. |
| 作者姓名： | 张开生 吕银芳 王雪梅 |
| 作者单位： | 1. 陕西科技大学电气与信息工程学院,西安,710021 2. 陕西金山电器有限公司,咸阳,712021 3. 陕西科技大学外语系,西安,710021 |
| 摘 要： | 针对传统注塑机温控系统存在的超调量大、调节时间长等缺点,提出了变参数自调整的模糊比例积分(FUZZY-PI)控制器设计思路,阐述了该控制器的设计方法及温控系统的软硬件设计方法。通过仿真实验说明,该系统实现了精密注塑机料筒温度和喷嘴温度的准确控制,依此可以取代传统的开关控制及比例积分微分控制,大大提高塑料制品的质量。 |
| 关 键 词： | 注塑机温度 FUZZY-PI控制器 参数自调整 模糊控制算法 实验仿真 |
| 修稿时间： | 2007-04-28 |
THE RESEARCH OF TEMPERATURE CONTROL METHOD OF THE INJECTION MOULDING MACHINE |
|
| Zhang Kaisheng,Lü Yinfang,Wang Xuemei.THE RESEARCH OF TEMPERATURE CONTROL METHOD OF THE INJECTION MOULDING MACHINE[J].Engineering Plastics Application,2007,35(7):72-75. | |
| Authors: | Zhang Kaisheng Lü Yinfang Wang Xuemei |
| Abstract: | Aiming at the sortcomings such as large overshot,long regulation time in traditional injection moulding machine,a method of desighing variable elements self-adjustment FUZZY-PI controller was put forward.The design meghod of the controller and software and hardware of the temperature control system were expatiated.Emulational experiment results proved that this system actualized the nicety control of the material cylinder temperature and nozzle temperature,it could replace traditional switch control and PID control and improve of product quality greatly. |
| Keywords: | temperature of injection moulding machine FUZZY-PI controller parameter self-adjustment fuzzy control algorithm emulational experiment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |