首页 | 本学科首页   官方微博 | 高级检索  
     

聚合物薄膜厚度和极化工艺对二次谐波的影响
引用本文:吕仕智,曹庄琪,王峰,沈启舜,杨艳芳.聚合物薄膜厚度和极化工艺对二次谐波的影响[J].光电工程,2004,31(4):28-31.
作者姓名:吕仕智  曹庄琪  王峰  沈启舜  杨艳芳
作者单位:上海交通大学物理系,上海,200240;上海交通大学物理系,上海,200240;上海交通大学物理系,上海,200240;上海交通大学物理系,上海,200240;上海交通大学物理系,上海,200240
基金项目:国家自然科学基金项目(60237010),上海市科委光科技项目(012261021),上海市应用材料和发展基金项目(0111)
摘    要:使用马克条纹和实时极化方法对掺杂型聚合物( DR1/PMMA )薄膜及其极化工艺进行了深入的研究。实验表明,在一定温度下,如果聚合物薄膜预烘时间不足,则极化时二次谐波强度很弱,极化驰豫也很快;预烘时间过长对二次谐波强度变化没有明显影响。也证实薄膜厚度在相干长度下,二次谐波强度最大。

关 键 词:聚合物薄膜  薄膜厚度  极化条件  二次谐波振荡
文章编号:1003-501X(2004)04-0028-04
收稿时间:2003/8/18
修稿时间:2003年8月18日

Influence of polymer film thickness and polarization process on secondary harmonic generation
Shi-zhi,CAO Zhuang-qi,WANG Feng,SHEN Qi-shun,YANG Yan-fang.Influence of polymer film thickness and polarization process on secondary harmonic generation[J].Opto-Electronic Engineering,2004,31(4):28-31.
Authors:Shi-zhi  CAO Zhuang-qi  WANG Feng  SHEN Qi-shun  YANG Yan-fang
Abstract:The doped polymer films and their polarization process are indepth studied by using Maker fringe and real-time polarization method. The experiments show that under the given conditions if pre-baking time of polymer film is insufficient, then the SHG (Secondary Harmonic Generation) intensity is very weak in polarization, the polarization relaxation is very fast and too long pre-baking time has no obvious influence on the SHG intensity. The experiments also demonstrate that the SHG intensity for the film thickness under coherent length is the biggest.
Keywords:Polymer film  Film thickness  Polarization conditions  Secondary harmonic generation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号