| WinCC在20kg铝锭连续铸造机中的应用 |
| |
| 引用本文： | 强明辉,刘大为,冯小林.WinCC在20kg铝锭连续铸造机中的应用[J].机械研究与应用,2008,21(5):104-105. |
| |
| 作者姓名： | 强明辉 刘大为 冯小林 |
| |
| 作者单位： | 兰州理工大学,甘肃,兰州,730050 |
| |
| 摘 要： | WinCC是西门子公司实现PLC与上位机之间的通讯及上位机监控画面的制作的组态软件。以20kg铝锭连续铸造机监控系统为例,介绍了WinCC与PLC及与外部设备之间的通讯组态,同时,对不同监控画面的组态进行了详细的描述。
|
| 关 键 词： | WINCC 铝锭铸造机 PLC |
Application of WinCC in 20kg aluminum ingot casting machine |
| |
| Qiang Ming-hui,Liu Da-wei,Feng Xiao-lin.Application of WinCC in 20kg aluminum ingot casting machine[J].Mechanical Research & Application,2008,21(5):104-105. |
| |
| Authors: | Qiang Ming-hui Liu Da-wei Feng Xiao-lin |
| |
| Affiliation: | Qiang Ming - hui, Liu Da - wei, Feng Xiao - lin ( Lanzhou university of technology, Lanzhou Gansu 730050) |
| |
| Abstract: | WinCC is the configuration software made by Siemens which can achieve PLC communication with PC and make the monitoring picture on screen of PC. Taking the 20kg aluminum ingot casting machine for example, the communication configuration of WinCC with PLC and outside devices are presented, meanwhile, the configuration of different monitoring pictures are described in detail. |
| |
| Keywords: | WinCC PLC |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
