首页 | 本学科首页   官方微博 | 高级检索  
     

Ti11V3Al3Sn合金的复合氧化研究
引用本文:郑乃贞,郑旦亮.Ti11V3Al3Sn合金的复合氧化研究[J].热处理技术与装备,2006,27(3):30-33.
作者姓名:郑乃贞  郑旦亮
作者单位:福州大学材料科学与工程学院,福建,福州,350002
摘    要:采用复合氧化(阳极极化 热氧化)法制备Ti11V3Al3Sn合金的表面转化膜.通过X射线衍射(XRD)、扫描电镜(ESEM)、显微硬度计和电化学分析仪分析了转化的膜物相、形貌、显微硬度和阳极极化曲线.结果表明:复合氧化转化膜由TiO2、TiO和Al2O3组成,以致密的金红石结构的TiO2为主.阳极氧化加复合的低温热氧化可以获得较致密、平坦的转化膜;阳极氧化加复合的较高温度的热氧化将得到粗糙、并分布着许多凹坑的转化膜层.复合氧化处理后,合金的表面硬度和耐电化学腐蚀性能大幅度提高.

关 键 词:钛合金  复合氧化  转化膜  阳极极化
文章编号:1673-4971(2006)03-0030-04
收稿时间:2005-10-08
修稿时间:2005年10月8日

The Study on Ti11V3Al3Sn Alloy by a Complex Anodizing
ZHENG Nai-zhen,ZHENG Dan-liang.The Study on Ti11V3Al3Sn Alloy by a Complex Anodizing[J].Heat Treatment Technology and Equipment,2006,27(3):30-33.
Authors:ZHENG Nai-zhen  ZHENG Dan-liang
Affiliation:College of Materials Science and Engineering Fuzhou University, Fuzhou Fujian 350002, China
Abstract:The surface conversion films of Ti11V3AlSn alloy were prepared by a complex anodizing. The phases structures, surface morphologies, micro-hardness and anodie polarization features of conversion films were analyzed by XRD, ESEM, micro-hardness test and electrochemistry system, The results indicate that the oxide conversion films by complex oxidizing are composed of TiO2, TiO and Al2O3, the TiO2 is denser rutile phase. The surface morphologies of conversion films by anodizing with thermal oxidizing at lower temperature can obtain smoother and denser surface. Anodizing with thermal oxidizing at higher temperature will get rough films with a many hollow. After complex anodizing treatment, the surface hardness and electrochemistry corrosion resistanee are improvod obviously.
Keywords:titanium alloy  complex oxidizing  conversion film  anodie polarization
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号