首页 | 本学科首页   官方微博 | 高级检索  
     

G(E)法与Gravel法处理能谱-剂量转换效果研究
引用本文:张驰,王玉东,周荣,杨朝文.G(E)法与Gravel法处理能谱-剂量转换效果研究[J].核电子学与探测技术,2017,37(3).
作者姓名:张驰  王玉东  周荣  杨朝文
作者单位:四川大学物理科学与技术学院,成都,610064
基金项目:国家自然科学基金,四川大学优秀青年基金
摘    要:为准确地得到γ射线的辐射剂量,对G(E)函数法和Gravel算法处理能谱-剂量的转换效果进行了研究。根据实际应用需求,采取蒙特卡罗方法模拟获取了?50 mm×50 mm NaI(Tl)探测器的Gravel法响应矩阵,并使用Matlab得到探测器的G(E)函数。使用NaI(Tl)探测器和多道谱仪系统测量标准源的能谱,分别使用G(E)法和Gravel法计算剂量值并与理论值进行比较,同时在计算过程中总结对比了两种方法的特点。

关 键 词:NaI(Tl)探测器  γ剂量  G(E)函数  Gravel算法

The Research of G(E)Function and Gravel Algorithm Managing Spectra-dose Conversion
ZHANG Chi,WANG Yu-dong,ZHOU Rong,YANG Chao-wen.The Research of G(E)Function and Gravel Algorithm Managing Spectra-dose Conversion[J].Nuclear Electronics & Detection Technology,2017,37(3).
Authors:ZHANG Chi  WANG Yu-dong  ZHOU Rong  YANG Chao-wen
Abstract:The spectrum-dose conversion method based on G (E)function and Gravel algorithm is studied to measure gamma ray dose accurately.The Gravel algorithm response matrix of φ50 mm×50 mm NaI(Tl) scintillation detector is simulated by Monte Carlo software,and G(E) function is calculated through Matlab program.The gamma ray energy spectra are measured by NaI (Tl) scintillation detector and multichannel analysis system with standard radiation sources.Then radiation dose values are calculated according to G (E) function and Gravel algorithm.Finally we compare the experimental values with the theoretical values,meanwhile the characteristics of two methods are summarized.
Keywords:NaI (Tl) detector  γ dose  G (E) function  Gravel algorithm
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号