| 电弧炉冶炼工艺对钢液氮含量的影响 |
| |
| 引用本文： | 王经民,林国强,李京社,李晶,唐国志,傅杰. 电弧炉冶炼工艺对钢液氮含量的影响[J]. 特殊钢, 2003, 24(4): 51-52 |
| |
| 作者姓名： | 王经民 林国强 李京社 李晶 唐国志 傅杰 |
| |
| 作者单位： | 1. 南京钢铁集团有限公司,南京,210038
2. 北京科技大学冶金学院,北京,100083 |
| |
| 摘 要： | 根据现场试验结果，分析了南钢100t电弧炉冶炼工艺对钢液氮含量的影响，结果表明：对同一批废钢，随着铁水加入量的增加，出钢钢液氮含量下降；出钢过程加铝脱氧则增加钢液吸氮量。
|
| 关 键 词： | 冶炼工艺 钢液 氮含量 电弧炉炼钢 废钢 出钢 脱氧 铁水加入量 |
Effect of Arc Furnace Operation Technology on Nitrogen Content in Molten Steel |
| |
| Wang Jingming and Lin Guoqiang. Effect of Arc Furnace Operation Technology on Nitrogen Content in Molten Steel[J]. Special Steel, 2003, 24(4): 51-52 |
| |
| Authors: | Wang Jingming and Lin Guoqiang |
| |
| Abstract: | Based on the test results in situ, the effect of steelmaking technology of an 100 t arc furnace at Nanjing Iron and Steel on nitrogen content in molten steel has been analyzed. The test results showed that with same batch of scrap, the nitrogen content in tapping steel decreased with increasing hot metal charging amount, and the absorbing nitrogen amount of molten steel from atmosphere increased while the molten steel was deoxidized by adding Al during tapping. |
| |
| Keywords: | Arc Furnace Steelmaking Nitrogen Content |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
