| 形变量对6111铝合金再结晶织构的影响 |
| |
| 引用本文： | 陈扬,田妮,赵刚,刘春明,左良. 形变量对6111铝合金再结晶织构的影响[J]. 轻合金加工技术, 2006, 34(5): 23-27 |
| |
| 作者姓名： | 陈扬 田妮 赵刚 刘春明 左良 |
| |
| 作者单位： | 东北大学材料与冶金学院,辽宁,沈阳,110004;辽宁工学院,辽宁,锦州,121001;东北大学材料与冶金学院,辽宁,沈阳,110004 |
| |
| 基金项目： | 国家科技攻关项目;教育部重点项目;高等学校优秀青年教师教学科研奖励计划 |
| |
| 摘 要： | 采用取向分布函数(ODF)法研究了冷轧形变量对6111铝合金再结晶织构的影响。结果表明:6111铝合金的再结晶织构主要由Cube ND15和{011}<111>织构组分构成;随冷轧形变量的增加,这两种织构组分的取向密度逐渐升高,但二者升高的速度并不相同,{011}<111>组分取向密度升高的速度比Cube ND15组分的快,当冷轧形变量大约为50%时,{011}<111>组分的取向密度超过Cube ND15组分的。
|
| 关 键 词： | 铝合金 轧制 形变量 再结晶 织构 |
| 文章编号： | 1007-7235（2006）05-0023-05 |
| 收稿时间： | 2005-12-26 |
| 修稿时间： | 2005-12-26 |
Effects of cold rolling reduction on recrystallization texture of 6111 aluminum alloy |
| |
| CHEN Yang,TIAN Ni,ZHAO Gang,LIU Chun-ming,ZUO Liang. Effects of cold rolling reduction on recrystallization texture of 6111 aluminum alloy[J]. Light Alloy Fabrication Technology, 2006, 34(5): 23-27 |
| |
| Authors: | CHEN Yang TIAN Ni ZHAO Gang LIU Chun-ming ZUO Liang |
| |
| Affiliation: | 1. Northeastern University, Shenyang 110004, China; 2. Liaoning Institute of Technology, Jinzhou 121001, China |
| |
| Abstract: | The effects of cold rolling reduction on the recrystallization textures of 6111 aluminum alloy have been investigated by means of the orientation distribution functions(ODFs).The results show that the recrystallization textures of 6111 aluminum alloy consist mainly of Cube ND15 component and {011}<111> component.With increasing the cold rolling reduction,the orientation intensity of the two texture components rise gradually,but the speeds of them are different.The speed of the orientation intensity of {011}<111> component is faster than the Cube ND15 component,so when the cold rolling reduction is approximately 50%,the orientation intensity of the {011}<111> component exceed that of the Cube ND15 component. |
| |
| Keywords: | aluminum alloy rolling reduction recystallization texture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
