Fabrication and characteristics of porous NiTi shape memory alloy synthesized by microwave sintering |
| |
Authors: | CY TangLN Zhang CT Wong KC ChanTM Yue |
| |
Affiliation: | Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China |
| |
Abstract: | Porous nickel titanium (NiTi) shape memory alloy (SMA) was successfully fabricated by microwave sintering method. This method allows formation of porous structures without using any pore-forming agents. Moreover, microwave sintering of NiTi SMA can be successfully performed at a relatively low sintering temperature of 850 °C and a short sintering time of 15 min. The pore characteristics, microstructure, phase transformation and stress-strain behavior of the porous NiTi SMA were investigated. The porous NiTi SMA exhibited porosity ratios from 27% to 48% and pore sizes range from 50 to 200 μm when using different sintering temperatures and holding times. The predominant B2 (NiTi) and B19′ (NiTi) phases were identified in the porous NiTi SMA. A multi-step phase transformation took place on heating and a two-step phase transformation took place on cooling of the porous NiTi SMA. The irrecoverable strains decreased with increasing sintering temperature, but the holding time had little effect on the stress-strain behavior at 60 °C. |
| |
Keywords: | Porous NiTi Shape memory alloys Microwave sintering Microstructure Phase transformation |
本文献已被 ScienceDirect 等数据库收录! |
|