| Abstract: | A simple theoretical model for flow in nonintermeshing twin screw extruders has been derived. The assumptions which in single screw extruders result in the “two parallel plates” model, in twin screw extruders result in the “three parallel plates” model. The flow rate equation can be expressed, for Newtonian fluids, in terms of drag and pressure flow terms, as in single screw extrusion theory, but each term is multiplied by a geometrical factor. This factor incorporates the effect of one screw on the drag and pressure flow terms of the other. The theoretical model was experimentally verified on a 1 inch diameter Bausano twin screw extruder. |
