| 基于VC++和ANSYS的曲轴三维模型有限元分析系统的研究 |
| |
| 引用本文： | 杨青真,王红梅,王玉秋. 基于VC++和ANSYS的曲轴三维模型有限元分析系统的研究[J]. 机械设计与制造, 2005, 0(11): 54-56 |
| |
| 作者姓名： | 杨青真 王红梅 王玉秋 |
| |
| 作者单位： | 1. 西北工业大学,西安,710072
2. 西安理工大学,西安,710048 |
| |
| 摘 要： | 以“最符合实际工况、最少量简化”为原则,基于VC＋＋和ANSYS接口技术开发了参数化三维整体曲轴有限元分析系统,设计了友好的类型导航界面,借助VC＋＋前台开发友好、方便、易用的人机交互界面,对复杂的、难于理解和掌握的ANSYS命令流进行后台封装,能够大大减少曲轴研究与设计的工作量.此技术既具有曲轴专用分析软件方便、高效的优点,又具有大型通用软件稳定、可靠的优点.
|
| 关 键 词： | VC＋＋ ANSYS 高效率 曲轴 有限元分析 |
| 文章编号： | 1001-3997(2005)11-0054-03 |
| 收稿时间： | 2005-01-26 |
| 修稿时间： | 2005-01-26 |
3D crankshaft finite element analysis system base on VC + + and ANSYS |
| |
| YANG Qing-zhen,WANG Hong-mei,WANG Yu-qiu. 3D crankshaft finite element analysis system base on VC + + and ANSYS[J]. Machinery Design & Manufacture, 2005, 0(11): 54-56 |
| |
| Authors: | YANG Qing-zhen WANG Hong-mei WANG Yu-qiu |
| |
| Abstract: | In principle of "most suitable for practice,least simplification",the parametrized 3D crankshaft finite element analysis system base on VC++and ANSYS is developed.The friendly interface of type guide is developed and the friendly,conveniently and easily used.Computing interface is provided with the help of VC++.Design and analysis work of crankshaft is extremely reduced by means of developing the complex and difficult ANSYS commands.This technology has the advantage of convenience and efficiency as professional crankshaft analysis software,and the stability and reliability of large common software. |
| |
| Keywords: | VC++ ANSYS High efficiency Crankshaft Finite element analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
