| CAD/CAM逆向工程在汽车方灯支架冲压模具的应用 |
| |
| 引用本文： | 张鹏,胡亚民,代兵,刘飞. CAD/CAM逆向工程在汽车方灯支架冲压模具的应用[J]. 锻压技术, 2003, 28(4): 50-53 |
| |
| 作者姓名： | 张鹏 胡亚民 代兵 刘飞 |
| |
| 作者单位： | 重庆工学院,400050;重庆大学 |
| |
| 摘 要： | 阐述了CAD／CAM逆向工程的关键技术和过程，介绍了其在汽车方灯支架冲压模具的应用实例，从而说明了该技术是CAD／CAM重要组成部分，并可大大提高模具的设计和加工周期。
|
| 关 键 词： | CAD/CAM 逆向工程 数字化 模具 |
Reverse engineering of CAD/CAM for stamping dies of square lamp-bracket of automobiles |
| |
| Zhang Peng Hu Yamin Dai Bing Chongqing Institute of Technology Liu Fei Chongqing University. Reverse engineering of CAD/CAM for stamping dies of square lamp-bracket of automobiles[J]. Forging & Stamping Technology, 2003, 28(4): 50-53 |
| |
| Authors: | Zhang Peng Hu Yamin Dai Bing Chongqing Institute of Technology Liu Fei Chongqing University |
| |
| Affiliation: | Zhang Peng Hu Yamin Dai Bing Chongqing Institute of Technology Liu Fei Chongqing University |
| |
| Abstract: | The key technology and process of the reverse engineering of CAD/CAM was summarized in the paper. using the square lamp|bracket of automobiles as an example, RE technology and its application in the stamping dies was intruduced. From RE to CAD/CAM, an integrated design and machining process of die was stated. |
| |
| Keywords: | CAD/CAM Reverse engineering Digitizing Die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
