Effect of VC and (Ta,Nb)C on wear of WC–10Co based cemented carbides |
| |
Abstract: | AbstractWC–Co cemented carbides, including small angular tungsten carbides particles, are used extensively to improve wear resistance. Some additives can affect mechanical and wear properties of these materials. In this study, the effect of VC and (Ta, Nb)C content on wear of WC–10Co were considered. The tests were performed at normal load of 230 N and sliding distance of 800 m up to 3200 m. Wear tests were carried out using dry sand/rubber wheel apparatus. Wear rate, standard and modified wear coefficients were calculated. The microstructures of prepared specimens were examined by optical microscopy. The morphological analysis of the worn surfaces was made by SEM. The results show that VC content has more effect than (Ta, Nb)C content on wear behaviour. Wear mechanism is different in the specimens, but removal of cobalt rich phase and fracture of carbide grains is clear in all of specimens. Abrasive wear is prevailing in all specimens. |
| |
Keywords: | WC–CO CEMENTED CARBIDES VC AND (TA NB)C CONTENT WEAR DRY SAND/RUBBER APPARATUS |
|
|