| 粉煤灰粒径对树脂基摩擦材料性能的影响 |
| |
| 引用本文： | 王占红,侯贵华,王宏亮,唐正生. 粉煤灰粒径对树脂基摩擦材料性能的影响[J]. 润滑与密封, 2012, 0(1): 49-52,66 |
| |
| 作者姓名： | 王占红 侯贵华 王宏亮 唐正生 |
| |
| 作者单位： | 盐城工学院材料工程学院;江苏省新型环保重点实验室 |
| |
| 基金项目： | 江苏省新型环保重点实验室开放基金资助项目(AE201019);江苏高校自然科学重大基础研究项目(08KJA43009);盐城工学院新人培养项目(XKY2011028) |
| |
| 摘 要： | 采用热压成型的方法制备不同粒径粉煤灰增强酚醛树脂基摩擦材料,研究掺杂不同粒径粉煤灰后摩擦材料的摩擦因数、磨损率和物理力学性能的变化情况,借助扫描电子显微镜观察摩擦材料的磨损表面微观形貌。研究表明:随着粉煤灰颗粒粒径的减小,填充的摩擦材料密度逐渐增加,硬度、抗弯强度、最大应变均呈现出先减小后增加的趋势;摩擦材料的摩擦因数变得较高且稳定,磨耗较低,当中位径小于等于4.70μm时,粉煤灰增强效果比较好。
|
| 关 键 词： | 粉煤灰 树脂基摩擦材料 摩擦磨损 |
Effect of Grain Size of Fly Ash on Properties of Resin-based Friction Materials |
| |
| Wang Zhanhong,Hou Guihua,Wang Hongliang,Tang Zhengsheng. Effect of Grain Size of Fly Ash on Properties of Resin-based Friction Materials[J]. Lubrication Engineering, 2012, 0(1): 49-52,66 |
| |
| Authors: | Wang Zhanhong Hou Guihua Wang Hongliang Tang Zhengsheng |
| |
| Affiliation: | 1.School of Materials Engineering,Yancheng Institute of Technology,Yancheng Jiangsu 224051,China; 2.Key Laboratory of New Environmental Protection of Jiangsu Province,Yancheng Jiangsu 224051,China) |
| |
| Abstract: | Fly ash filled resin-based friction materials were prepared by heat-press molding method.The effects of grain size of fly ash on friction coefficient,wear rate,physical and mechanical properties of friction materials were studied.Morphologies of wear surfaces were observed by scanning electron microscopy.The results from show that with the decrease of grain size fly ash,the density of the resin-based friction materials increases,the hardness,flexural strength and maximum strain first decrease and then increase,the friction coefficients becomes higher and more stable,the wear rate becomes lower.The fly ash with grain size less than 4.70 μm exhibits the optimum enhancement effect. |
| |
| Keywords: | fly ash resin-based friction materials friction and wear |
| 本文献已被 CNKI 等数据库收录！ |
|
