| 三自由度并联机构坐标测量机误差建模与仿真 |
| |
| 引用本文： | 刘得军,车仁生,叶东,黄庆成.三自由度并联机构坐标测量机误差建模与仿真[J].中国机械工程,2001,12(7):752-755. |
| |
| 作者姓名： | 刘得军 车仁生 叶东 黄庆成 |
| |
| 作者单位： | 1. 大庆石油学院;哈尔滨工业大学
2. 哈尔滨工业大学 |
| |
| 基金项目： | 国家自然科学基金资助项目(59775086) |
| |
| 摘 要： | 给出了三自由度并联机构坐标测量的运动反解模型，依据矩阵全微分理论，导出测头位姿态差与各运动副位置误差及调节器运动误差之间的相互关系，建立了新型坐标测量机的误差模型。通过计算机仿真，讨论了机构参数误差对测量结果的影响，为实际误差的补偿写控制奠定了理论基础。
|
| 关 键 词： | 坐标测量机 并联机 运动反解模型 误差模型 仿真 |
| 文章编号： | 1004-132Ⅹ(2001)07-0752-04 |
Error Modeling and Simulation of 3-DOF Parallel Link Coordinate Measuring Machine |
| |
| LIU Dejun.Error Modeling and Simulation of 3-DOF Parallel Link Coordinate Measuring Machine[J].China Mechanical Engineering,2001,12(7):752-755. |
| |
| Authors: | LIU Dejun |
| |
| Abstract: | Firstly, this paper establishes the inverse kinematic model of a new coordinate measuring machine (CMM) based on the parallel link mechanism with three spatial degrees of freedom (3-DOF). Then, based on the differentiation of the kinematics, the relation ship between the input parameter errors, which consist of the position errors of the joints and the kinematic errors of the actuators, and the output errors at the probe of the new CMM is derived, thereby the error model is obtained. Finally, the influence of the structural parameter errors on the measuring accuracy is discussed by computer simulation. |
| |
| Keywords: | coordinate measuring machineparallel link mechanisminverse kinematic modelerror model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
