| 对装配线线体Pro/E参数化设计及ANSYS有限元分析 |
| |
| 引用本文： | 林巨广,刘波. 对装配线线体Pro/E参数化设计及ANSYS有限元分析[J]. 组合机床与自动化加工技术, 2007, 0(3): 20-22 |
| |
| 作者姓名： | 林巨广 刘波 |
| |
| 作者单位： | 合肥工业大学,机械与汽车工程学院,合肥,230009 |
| |
| 摘 要： | 论述了应用Pro/E软件进行汽车装配线线体的三维建模及参数化设计方法。实现了机械零件装配图的快速造型和重构。利用Pro/E与ANSYS接口技术和ANSYS软件,对Pro/E中设计的具体装配线线体在一定载荷作用下的应力状态进行了有限元仿真分析。研究结果对装配线线体的开发、改进和优化装配线线体的设计具有一定的参考价值。
|
| 关 键 词： | 装配线线体 三维建模 参数化设计 有限元应力分析 |
| 文章编号： | 1001-2265（2007）03-0020-03 |
| 修稿时间： | 2006-08-17 |
Parametric Design and Finite Element Analysis of Assembly Line |
| |
| LIN Ju-guang,LIU Bo. Parametric Design and Finite Element Analysis of Assembly Line[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2007, 0(3): 20-22 |
| |
| Authors: | LIN Ju-guang LIU Bo |
| |
| Affiliation: | School of Mechanics and Automobile Engineering,Hefei University of Technology, Hefei 230009 ,China |
| |
| Abstract: | The method of 3D modeling and parametric design of auto assembly line in Pro/E software is discussed.It realize quickly model of mechanical part.Using the interface technology between Pro/E and ANSYS software,the simulation analysis of stress status of the assembly Line designed in Pro/E under a certain load is made.The research results has reference value to gear model library development and to the optimization design of the assembly Line. |
| |
| Keywords: | assembly line 3D modeling parametric design finite element stress analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
