Investigation of atomization concepts for large‐scale flame spray pyrolysis (FSP)

Flame spray pyrolysis (FSP) is a versatile process for the production of inorganic nanoparticles featuring the advantage that the reagents are directly dissolved in the liquid fuel that is atomized to form the burning flame. A majority of previous studies on flame spray pyrolysis is focused on the formation and growth processes of the nanoparticles but neglect the preceding step of precursor atomization and spray formation. In this work an atomization concept for large‐scale nanoparticle production by flame spray pyrolysis is presented. A pressure swirl nozzle is applied for creating a liquid hollow cone, and in a second step, different dispersion gas nozzles are utilized to enhance the atomization of the liquid phase and to influence the spray cone formation and geometry. The relevant parameters influencing the atomization process (dispersion gas feed rate, liquid feed rate) are investigated (for air, water) in non‐burning (cold) spray conditions in order to access the utilization of the different atomizer concepts for the flame spray pyrolysis‐process. Measurements are conducted by applying high speed camera imaging (HSC), particle image velocimetry (PIV) and laser diffraction spectroscopy (LDS). Computational fluid dynamics (CFD) revealed further insight into the gas entrainment and the trajectory of droplets within the spray. Results show that the liquid volume flow rate (and thus the productivity of the process) may be increased significantly while still maintaining an appropriate droplet size compared to the conventional atomization process conditions in flame spray pyrolysis reactors.