| Abstract: | This paper deals with new acoustic methods of two-phase flow diagnostics used to carry out research in the fields of nuclear power thermophysics and nuclear power plant (NPP) technologies equipment control. All the designs are to be used under extreme conditions, characteristic for water coolant, with temperature up to 350°C and pressure 20 MPa. All the safety and reliability requirements are met. The methods use waveguide ultrasonic transducers for longitudinal and bending waves, made according to specially designed technology (waveguide acoustic transducers — WAT technology). This paper deals with the operating principles of transducers and processing device physical models as well as some results on the practical use of this equipment. The method of acoustic impedance is based on measuring attenuation of a longitudinal or bending ultrasonic wave in a thin-walled tube diameter vapour fraction or the level of the coolant in the tank. The waveguide transducers, designed by the centre, use bending waves of a surface type. They enable us to carry out diagnostics of the liquid film on the inner surface of the tube or discover gas inclusions in the liquid flow. The paper touches upon the method of acoustic emission for measuring moisture content in a steam flow. |
