次磷酸钠化学镀铜镍合金的研究

研究了以次磷酸钠为还原剂的化学镀铜过程。分析了温度、pH、硫酸镍含量对化学镀铜沉积速率的影响及镀层的表面形貌和结构。结果表明,沉积速率随着镀液温度、pH和N i离子浓度的提高而增大。镀层组分含量和XRD实验结果表明镀层为铜镍合金,呈面心立方结构,晶面间距d与晶胞参数a与标准Cu-N i的相比略大。SEM实验表明,镀层表面形貌为团粒状,颗粒大小较不均匀。

Studies on Cu-Ni alloy electroless plating using sodium hypophosphite as reductant

The process of the electroless copper plating(using) sodium hypophosphite as reductant was studied.The influences of temperature,pH,nickel sulphate content on deposition rate of copper electroless plating as well as the surface morphology and structure of the deposit were(analyzed.)The results show that the deposition rate is(accelerated) with increasing bath temperature,pH value and the concentration of nickel ion.Both deposit composition and XRD results indicate that the deposits are Cu-Ni alloy with face-centered cubic structure.Its structural parameters of d and a are slightly larger than that of the standard Cu-Ni(alloy).SEM experiment displays that the deposit has a(surface) morphology of granular structure with uneven grain sizes.