首页 | 本学科首页   官方微博 | 高级检索  
     

条带开采煤柱支承压力与塑性区分布规律研究
引用本文:谷拴成,杨超凡,王盼,牛宏新.条带开采煤柱支承压力与塑性区分布规律研究[J].矿业安全与环保,2021,48(2):1-6.
作者姓名:谷拴成  杨超凡  王盼  牛宏新
作者单位:1.西安科技大学 建筑与土木工程学院, 陕西 西安 710054
基金项目:国家自然科学基金项目(51508462)。
摘    要:为了对条带开采煤柱支承压力与塑性区分布规律进行研究,采用理论分析、数值模拟及现场监测的方法,通过考虑采空区上覆煤岩体成拱效应,确定出煤柱支承压力分布情况。结合煤柱支承压力分布情况,根据玉华煤矿工程条件,采用ANSYS15.0软件模拟计算不同采空区宽度(100~260 m)、不同工作面埋深(400~600 m)的煤柱最大塑性区宽度,并对玉华煤矿2410工作面回风巷道护巷煤柱的最大塑性区进行监测。研究结果表明:依据所提出的煤柱支承压力计算方法,模拟计算出的煤柱最大塑性区宽度和现场监测结果一致。给出了确定煤柱支承压力分布的计算方法,以及依据该方法计算出的煤柱最大塑性区分布规律,可为煤柱留设宽度设计提供依据。

关 键 词:成拱效应  煤柱  支承压力  塑性区宽度  理论分析  数值模拟
收稿时间:2020-04-22
修稿时间:2020-04-22

Study on distribution law of supporting pressure and plastic zone of coal pillar in strip mining
GU Shuancheng,YANG Chaofan,WANG Pan,NIU Hongxin.Study on distribution law of supporting pressure and plastic zone of coal pillar in strip mining[J].Mining Safety & Environmental Protection,2021,48(2):1-6.
Authors:GU Shuancheng  YANG Chaofan  WANG Pan  NIU Hongxin
Affiliation:1.School of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an 710054, China
Abstract:In order to study the distribution law of supporting pressure and plastic zone of coal pillar in strip mining,by means of theoretical analysis,numerical simulation and field monitoring methods,the supporting pressure distribution of coal pillar is determined by considering the arching effect of overlying coal and rock mass in goaf.Combined with the coal pillar supporting pressure distribution,according to the engineering conditions of Yuhua Coal Mine,the maximum plastic zone width of coal pillar with different goaf width(from 100 m to 260 m)and different working face buried depth(from 400 m to 600 m)was calculated by ANSYS15.0 simulation,and the maximum plastic zone of coal pillar with return airway in 2410 working face of Yuhua Coal Mine was monitored.The research results show that the maximum plastic zone width of coal pillar calculated by simulation is consistent with the field monitoring results according to the proposed calculation method of coal pillar supporting pressure.The calculation method to determine the supporting pressure distribution of coal pillar and the distribution law of the maximum plastic zone of coal pillar calculated by this method are given,which can provide a basis for the design of coal pillar width.
Keywords:arch effect  coal pillar  supporting pressure  width of plastic zone  theoretical analysis  numerical simulation
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《矿业安全与环保》浏览原始摘要信息
点击此处可从《矿业安全与环保》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号