| 耐高温绝缘GFRP管的真空辅助树脂传递成型工艺研究 |
| |
| 引用本文： | 胡亚丽,张续柱,杨朝明,程太品. 耐高温绝缘GFRP管的真空辅助树脂传递成型工艺研究[J]. 高分子材料科学与工程, 2002, 18(4): 198-200 |
| |
| 作者姓名： | 胡亚丽 张续柱 杨朝明 程太品 |
| |
| 作者单位： | 华北工学院化工系,山西,太原,030051 |
| |
| 摘 要： | 阐述了耐高温绝缘GFRP管的成型工艺及原材料选择，并对影响成型工艺的主要因素作了理论分析及试验验证。研究表明，以TDE－85／DDS体系为为基体，以无碱无捻玻璃纤维方格布为增强材料，用VARTM工艺成型的石油勘探高性能平衡管完全满足技术要求。
|
| 关 键 词： | 耐高温绝缘GFRP管 真空辅助树脂 传递成型工艺 研究 玻璃钢 VARTM工艺 凝胶时间 注胶压力 |
| 文章编号： | 1000-7555(2002)04-0198-03 |
| 修稿时间： | 2000-09-15 |
STUDY ON VACUUM ASSISTED RESIN TRANSFER MOLDING FOR HIGH-TEMPERATURE RESISTING AND INSULATING GFRP TUBE |
| |
| HU Ya li,ZHANG Xu zhu,YANG Zhao ming,CHENG Tai ping. STUDY ON VACUUM ASSISTED RESIN TRANSFER MOLDING FOR HIGH-TEMPERATURE RESISTING AND INSULATING GFRP TUBE[J]. Polymer Materials Science & Engineering, 2002, 18(4): 198-200 |
| |
| Authors: | HU Ya li ZHANG Xu zhu YANG Zhao ming CHENG Tai ping |
| |
| Abstract: | High temperature resisting and insulating GFRP tube was studied for the exploitation of petroleum. Because of its particular requirements of thermal and electrical properties, suitable method and materials must be used. This paper mainly deals with the selection of processing and materials of GFRP tube as well as the main factors that influence its processing procedure by theoretic analysis and experimental test. The study results indicate that TDE 856/DDS system is its suitable matrix and E woven glass fiber is its good reinforcement. It is also demonstrated that the VARTM equilibrium tubes have exceeded several technique demands and fit for the exploitation petroleum. |
| |
| Keywords: | vacuum assisted resin transfer molding gel time injection pressure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
