| 300kA预焙铝电解槽中修的可行性探讨 |
| |
| 引用本文： | 焦庆国,潘卫平,胡卫东,罗英涛. 300kA预焙铝电解槽中修的可行性探讨[J]. 轻金属, 2006, 0(12): 34-36 |
| |
| 作者姓名： | 焦庆国 潘卫平 胡卫东 罗英涛 |
| |
| 作者单位： | 中国铝业郑州研究院,河南,郑州,450041 |
| |
| 摘 要： | 通过对300kA电解槽停槽后的炉底状况分析,表明大型预焙槽具备中修和二次启动的可行性。同时提出大型预焙电解槽具备中修的要求,为大型电解槽进一步延长槽寿命提供了新思路。
|
| 关 键 词： | 预焙槽 中修 二次启动 槽寿命 |
| 文章编号： | 1002-1752(2006)12-0034-03 |
| 收稿时间： | 2005-11-25 |
| 修稿时间： | 2005-11-25 |
Feasibility analysis of 300kA pre- baked anode aluminum reduction cell''''s medium repair |
| |
| JIAO Qing-guo,PAN Wei-ping,HU Wei-dong,LUO Ying-tao. Feasibility analysis of 300kA pre- baked anode aluminum reduction cell''''s medium repair[J]. Light Metals, 2006, 0(12): 34-36 |
| |
| Authors: | JIAO Qing-guo PAN Wei-ping HU Wei-dong LUO Ying-tao |
| |
| Affiliation: | Zhengzhou Research Institute of Chalco, Zhengzhou 450041, China |
| |
| Abstract: | The paper shows the feasibility of strarting up after medium repair of reduction cell when 300kA cell is stopped and its bottom analyzed.Therefore,a new approach is put forward of prolonging the service life of the cell. |
| |
| Keywords: | pre-baked anode cell medium repair re-starting up cell's service life |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
