Optimization of physical and mechanical properties of rubber compounds by a response surface methodological approach |
| |
| Authors: | V. Sridhar K. Prasad S. Choe P. P. Kundu |
| |
| Affiliation: | 1. Department of Chemical Technology, Sant Longowal Institute of Engineering & Technology, Longowal, Sangrur-148106, India;2. Department of Food Technology, Sant Longowal Institute of Engineering & Technology, Longowal, Sangrur-148106, India;3. Department of Chemical Engineering, Inha University, Inchon 402–751, Korea |
| |
| Abstract: | Response surface methodology was used for optimizing the ratio of vegetable oil and carbon black and occluded volume fraction of rubber in the compound. Central composite design for two variables was chosen as the experimental design. The data obtained from measurement of properties was fitted as a two variable second-order equation, and were plotted as contours using software developed from MATLAB v.5.1. From contours it is observed that at the ratio of 0.06 of vegetable oil and carbon black, there is maximum coupling, and a further increment in vegetable oil and carbon black ratio shows less coupling and more plasticizing effect. The ultimate failure properties like tensile and tear strength and elongation decreases with an increase in occluded volume fraction, reaches a minima at the central region, followed by an increase, whereas 300% modulus and hardness decreases throughout.© 2001 John Wiley & Sons, Inc, J Appl Polym Sci 82: 997-1005, 2001 |
| |
| Keywords: | reponse surface methodology ratio of vegetable oil and carbon black occluded volume fraction of rubber contour plots |
|
|
