| 12.00-20 18PR矿山型轮胎的结构设计 |
| |
| 引用本文： | 张许红.12.00-20 18PR矿山型轮胎的结构设计[J].轮胎工业,2005,25(9):528-530. |
| |
| 作者姓名： | 张许红 |
| |
| 作者单位： | 中国神马集团橡胶轮胎有限责任公司,河南,平顶山,467001 |
| |
| 摘 要： | 介绍12.00-20 18PR矿山型轮胎的结构设计.本设计轮胎结构参数取值较大,胎面选用横向八角花纹,花纹深度为19 mm;胎面采用三方四块结构;缓冲层采用四宽结构;胎圈设计为三钢丝圈;钢丝圈包布采用1400dtex/2V2锦纶66帘布,胎圈包布采用1400dtex/1×1400dtex/1锦纶66帆布.轮胎充气外缘尺寸和耐久性能等达到设计要求和国家标准.
|
| 关 键 词： | 矿山型轮胎 结构设计 施工设计 |
| 文章编号： | 1006-8171(2005)09-0528-03 |
| 修稿时间： | 2005年3月20日 |
Structure design of 12.00-20 18PR mine tire |
| |
| ZHANG Xuhong.Structure design of 12.00-20 18PR mine tire[J].Tire Industry,2005,25(9):528-530. |
| |
| Authors: | ZHANG Xuhong |
| |
| Affiliation: | China Shenma Group Rubber Tire Co.,Ltd |
| |
| Abstract: | The structure design of a 12.00-20 18PR mine tire is described.The greater values of structure parameters are taken in this design to improve the wear,cut and puncture resistances of tire.The details of design are as follows:octagonal tread patterns with 19 mm depth;three-formula and four-piece extruded tread;four-wide ply breaker;three-wire bead structure;1400dtex/2V2 nylon 66 cord flipper and 1400dtex/1×1400dtex/1 nylon 66 canvas chafer.The inflated overall diameter and endurance of finished tire are in accordance with the requirements of the design and the relevant national standard. |
| |
| Keywords: | mine tire structure design construction design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《轮胎工业》浏览原始摘要信息 |
|
点击此处可从《轮胎工业》下载全文 |
