| 基于Matlab的芯轴最小弯曲半径计算 |
| |
| 引用本文： | 刘婧瑶,唐承统,宁汝新. 基于Matlab的芯轴最小弯曲半径计算[J]. 锻压技术, 2009, 34(1) |
| |
| 作者姓名： | 刘婧瑶 唐承统 宁汝新 |
| |
| 作者单位： | 北京理工大学,机械与车辆工程学院,北京,100081;北京理工大学,机械与车辆工程学院,北京,100081;北京理工大学,机械与车辆工程学院,北京,100081 |
| |
| 摘 要： | 在薄壁管有芯NC绕弯成形过程中,若弯曲半径过小则芯轴块间易发生碰撞干涉,而最小半径受限于芯轴连接方式和结构参数.通过分析常用芯轴结构特点和发生芯轴块碰撞干涉的位置,关于芯轴直径、球头节个数、球头节间距和芯轴块厚度建立了芯轴最小弯曲半径的解析模型.并采用Matlab工具求解方程得到芯轴的最小弯曲半径,为芯轴的设计和弯曲工艺提供了理论依据.
|
| 关 键 词： | 芯轴 最小弯曲半径 Matlab 碰撞干涉 |
Mathematic calculation approach of minimum bending radius of mandrel based on Matlab |
| |
| LIU Jing-yao,TANG Cheng-tong,NING Ru-xin. Mathematic calculation approach of minimum bending radius of mandrel based on Matlab[J]. Forging & Stamping Technology, 2009, 34(1) |
| |
| Authors: | LIU Jing-yao TANG Cheng-tong NING Ru-xin |
| |
| Affiliation: | School of Mechanical and Vehicular Engineering;Beijing Institute of Technology;Beijing 100081;China |
| |
| Abstract: | In NC rotary-draw bending of thin-wall tube,if the bending radius is small excessively then the collision will happen between mandrel balls,but the minimum bending radius is confined by structure characteristic and joint fashion.According to common structure characteristic of mandrel and the interference and collision position of mandrel ball,the analysis-model of minimum bending radius was established in terms of the mandrel-structure parameters and the analysis of mandrel movement.And Matlab was adopted t... |
| |
| Keywords: | Matlab |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
