首页 | 本学科首页   官方微博 | 高级检索  
     

铝合金与钢的电阻铆焊
引用本文:邱然锋,申中宝,李青哲,石红信,王楠楠. 铝合金与钢的电阻铆焊[J]. 焊接学报, 2016, 37(9): 39-42
作者姓名:邱然锋  申中宝  李青哲  石红信  王楠楠
作者单位:1.河南科技大学 材料科学与工程学院, 洛阳 471023;有色金属共性技术河南省协同创新中心, 洛阳 471003
基金项目:国家自然科学基金资助项目(U1204520),河南省高校创新人才支持计划(16 HASTTT050),河南省国际科技合作计划项目(162102410023),河南省高等学校青年骨干教师资助计划(2013GGJS-064)
摘    要:采用电阻铆焊方法对铝合金A6061与低碳钢Q235进行了焊接. 通过扫描电子显微镜对接头微观组织进行了观察,分析了接头界面区组织,研究了焊接电流对接头抗剪载荷的影响. 在铝/铆钉、铝/钢接合界面均观察到了反应层的形成,通过成分分析得知生成两界面的反应物分别是FeAl与FeAl3;而钢板/铆钉界面接合较好. 焊接电流为21 kA时所得接头的抗剪载荷最大为3.85 kN. 结果表明,采用电阻铆焊方法焊接铝合金与钢是比较有效的.

关 键 词:铝合金     电阻铆焊
收稿时间:2014-10-16

Resistance rivet-welding of aluminum alloy and steel
QIU Ranfeng,SHEN Zhongbao,LI Qingzhe,SHI Hong-xin and WANG Nannan. Resistance rivet-welding of aluminum alloy and steel[J]. Transactions of The China Welding Institution, 2016, 37(9): 39-42
Authors:QIU Ranfeng  SHEN Zhongbao  LI Qingzhe  SHI Hong-xin  WANG Nannan
Affiliation:1.School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, China;Collaborative Innovation Center of Nonferrous Metals, Luoyang 471003, China2.School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, China
Abstract:A new joining method termed resistance rivet-welding was tried to weld steel/aluminum alloy. The interfacial microstructure was observed by using scaning electron microscopy. A reaction layer of FeAl was observed at the rivet/aluminum alloy interface, whereas the reaction product of FeAl3 was detected at the interface between steel and aluminum alloy. The joining between steel Q235 and rivet was sound. The maximum tensile shear load of 3.85 kN was obtained at welding current of 21 kA. The results reveal that resistance rivet-welding is a relatively effective method for joining steel and aluminum alloy.
Keywords:aluminum alloy  steel  resistance rivet-welding
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号