首页 | 本学科首页   官方微博 | 高级检索  
     

Asymmetry Behaviour between Tension and Compression for Prestrained Materials under Cyclic Loading
作者单位:Huifen CHAI Zheng RUAN Quncheng FAN Dept.of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an,710049,China
摘    要:The prestrained metals show substantial asymmetry between tension and compression in addition tothe softening under cyclic loading, thus the cyclic creep takes place at a load-control test. The soft-ening reflects the decrease in density of dislocation and total internal stress, and the creep implies theasymmetry in back stress between tension and compression, The mechanical behaviour of the soft-ening is similar for materials with different slip modes, but their features of creep differ significantly.The creep of planar slip Cu-Zn alloy exhibits“explosively”, while that of wavy slip Cu and low car-bon steel occurs continuously and slowly. The explanation of creep behaviour via the internal dislo-cation structure was presented in this paper. According to asymmetw behaviour, it can be concludedthat the internal processes of softehing also strongly depend on the slip mode. In addition, underhigh stress amplitude the opposite asymmetries take place for Cu and Cu-Zn alloy, it indicates thatasymmetric back stresses developed in pretension have been eliminated even though the density andthe configuration of dislocations have not reached equilibrium.

收稿时间:1993-07-28

Asymmetry Behaviour between Tension and Compression for Prestrained Materials under Cyclic Loading
Huifen CHAI Zheng RUAN Quncheng FAN Dept.of Materials Science and Engineering,Xi''an Jiaotong University,Xi''an,,China. Asymmetry Behaviour between Tension and Compression for Prestrained Materials under Cyclic Loading[J]. Journal of Materials Science & Technology, 1993, 9(4): 273-278
Authors:Huifen CHAI Zheng RUAN Quncheng FAN Dept.of Materials Science  Engineering  Xi''an Jiaotong University  Xi''an    China
Abstract:The prestrained metals show substantial asymmetry between tension and compression in addition to the softening under cyclic loading, thus the cyclic creep takes place at a load-control test. The soft- ening reflects the decrease in density of dislocation and total internal stress, and the creep implies the asymmetry in back stress between tension and compression, The mechanical behaviour of the soft- ening is similar for materials with different slip modes, but their features of creep differ significantly. The creep of planar slip Cu-Zn alloy exhibits“explosively”, while that of wavy slip Cu and low car- bon steel occurs continuously and slowly. The explanation of creep behaviour via the internal dislo- cation structure was presented in this paper. According to asymmetw behaviour, it can be concluded that the internal processes of softehing also strongly depend on the slip mode. In addition, under high stress amplitude the opposite asymmetries take place for Cu and Cu-Zn alloy, it indicates that asymmetric back stresses developed in pretension have been eliminated even though the density and the configuration of dislocations have not reached equilibrium.
Keywords:internal stress  cyclic loading  dislocation
本文献已被 CNKI 等数据库收录!
点击此处可从《材料科学技术学报》浏览原始摘要信息
点击此处可从《材料科学技术学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号