| 磷酸盐基体及其纤维增强复合材料的研究-基体磷/金属元素摩尔比对工艺和材料性能的影响 |
| |
| 引用本文： | 罗进文,麻平,郭卫红,黄发荣.磷酸盐基体及其纤维增强复合材料的研究-基体磷/金属元素摩尔比对工艺和材料性能的影响[J].玻璃钢/复合材料,2004(2):45-48. |
| |
| 作者姓名： | 罗进文 麻平 郭卫红 黄发荣 |
| |
| 作者单位： | 华东理工大学材料科学与工程学院,上海,200237 |
| |
| 基金项目： | 教育部科学技术研究项目 |
| |
| 摘 要： | 本实验以自制的磷酸盐为胶粘剂,以金属氧化物为固化剂,玻璃纤维为增强材料,通过手糊成型再经热压制得了耐高温透波复合材料.测定了不同磷/金属元素P/M(M=Al、Cr等)]摩尔比基体胶的粘度、固化时间等参数;并用XRD分析了材料基体组分,同时探讨了基体胶的P/M摩尔比对所制得复合材料性能的影响,确定了基体胶的最佳P/M摩尔比.
|
| 关 键 词： | 透波复合材料 磷酸盐基体 介电性能 磷酸盐基体 玻璃纤维 增强复合材料 研究 金属元素 摩尔比 工艺 复合材料性能 影响 FIBER REINFORCED COMPOSITES MATRIX PHOSPHATE METAL STUDY EFFECTS PROCESS 最佳 基体组分 分析 参数 |
| 文章编号： | 1003-0999(2004)02-0045-04 |
| 修稿时间： | 2003年12月2日 |
STUDY OF METAL PHOSPHATE MATRIX AND FIBER REINFORCED COMPOSITES:EFFECTS OF P/M MOLAR RATIO OF PHOSPHATE MATRIX ON PROCESS AND PROPERTES OF COMPOSITES |
| |
| LUO Jin wen,MA Ping,GUO Wei hong,HUANG Fa rong.STUDY OF METAL PHOSPHATE MATRIX AND FIBER REINFORCED COMPOSITES:EFFECTS OF P/M MOLAR RATIO OF PHOSPHATE MATRIX ON PROCESS AND PROPERTES OF COMPOSITES[J].Fiber Reinforced Plastics/Composites,2004(2):45-48. |
| |
| Authors: | LUO Jin wen MA Ping GUO Wei hong HUANG Fa rong |
| |
| Abstract: | In this paper a phosphate matrix was prepared with a phosphate adhesive and metal oxide and glass fibre used respectively as a hardener and a reinforcing material. The wave transmitting composite was fabricated by hand lay up and then hot pressing process. The viscosity and cure time of the matrix with different molar ratio P/M(M=Al,Cr,etc.) were measured.The effect of P/M ratio on components of matrix was analyzed by XRD, and effects of P/Al ratio on the properties of the composite were also investigated. The optimum P/M ratio of the matrix was found. The results show composites have good flexural strength and dielectric property. |
| |
| Keywords: | wave transmitting composite phosphate matrix dielectric property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
