| 基于PowerPC处理器SMP系统的U-Boot移植 |
| |
| 引用本文： | 李相国,杨树元.基于PowerPC处理器SMP系统的U-Boot移植[J].微计算机应用,2008,29(9). |
| |
| 作者姓名： | 李相国 杨树元 |
| |
| 作者单位： | 1. 中国科学院声学研究所,北京,100190;中国科学院研究生院,北京,100039
2. 中国科学院声学研究所,北京,100190 |
| |
| 摘 要： | 引导加载程序是计算机系统加电后运行的第一段程序代码,负责系统硬件的初始化和加载操作系统,它和系统硬件结构密切相关.本文针对一个基于PowerPC处理器的对称多处理系统平台,进行了U-Boot移植.并介绍了对称多处理系统的不同之处和移植方法.
|
| 关 键 词： | 对称多处理 移植 |
U-Boot Porting for SMP System Based on PowerPC |
| |
| LI Xiangguo,YANG Shuyuan.U-Boot Porting for SMP System Based on PowerPC[J].Microcomputer Applications,2008,29(9). |
| |
| Authors: | LI Xiangguo YANG Shuyuan |
| |
| Abstract: | The bootloader is the first piece of program run after a computer is powered on,which is mainly aimed at initializing system hardware and booting up operating system,and it is highly dependent on hardware.This paper introduces the U-Boot porting process for a SMP system based on PowerPC,also discusses the characteristic of SMP system and the according porting method. |
| |
| Keywords: | PowerPC U-Boot |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
