| 基于AutoCAD VBA技术的回转型刀具专用CAM软件开发 |
| |
| 引用本文： | 苏旭武.基于AutoCAD VBA技术的回转型刀具专用CAM软件开发[J].机床与液压,2006(8):41-44. |
| |
| 作者姓名： | 苏旭武 |
| |
| 作者单位： | 湖北工业大学机械工程学院,湖北武汉,430068 |
| |
| 摘 要： | 基于AutoCAD VBA技术开发了一套用于回转型刀具刀刃加工的专用CAM软件。首先分析了通用CAM软件加工此类零件的缺点。在此基础上,研究了新的加工方法,即“先卷绕、后补偿”,并用VBA开发工具在AutoCAD中编程实现了该方法。实践证明,用该软件生成的数控代码能够加工出合格的回转刀具。
|
| 关 键 词： | 回转型刀具 CAM VBA AutoCAD |
| 文章编号： | 1001-3881(2006)8-041-3 |
| 修稿时间： | 2005年10月8日 |
Development of Dedicated CAM Software for Machining Cylindrical Tool Based on VBA for AutoCAD |
| |
| SU Xuwu.Development of Dedicated CAM Software for Machining Cylindrical Tool Based on VBA for AutoCAD[J].Machine Tool & Hydraulics,2006(8):41-44. |
| |
| Authors: | SU Xuwu |
| |
| Abstract: | A dedicated CAM software used for machining cylindrical tool was developed based on VBA for AutoCAD.The shortcoming of universal CAM softwares when they are used for machining parts like cylindrical tool was analyzed.On basis of the analysis,new method of machining,that is "first roll,then compensation",was studied.The method was realized by programming with VBA developing tool in AutoCAD environment.Practice proves that NC codes output by the software can be used to machine cylindrical tools with good quality. |
| |
| Keywords: | CAM VBA AutoCAD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
