| W-Ni-Fe高比重合金的SPS烧结行为 |
| |
| 引用本文： | 梅雪珍, 贾成厂, 尹法章, 陈黎亮. W-Ni-Fe高比重合金的SPS烧结行为[J]. 工程科学学报, 2007, 29(5): 475-478. DOI: 10.13374/j.issn1001-053x.2007.05.007 |
| |
| 作者姓名： | 梅雪珍 贾成厂 尹法章 陈黎亮 |
| |
| 作者单位： | 北京矿冶研究总院金属材料研究所,北京,100044;北京科技大学材料科学与工程学院,北京,100083;北京科技大学材料科学与工程学院,北京,100083 |
| |
| 摘 要： | 采用放电等离子烧结(SPS)设备制备了93W-5.6Ni-1.4Fe高比重合金,烧结温度范围为1100~1180℃,保温时间为5min.对不同烧结温度下的样品进行了密度、硬度、抗弯强度等性能测试,采用场发射SEM观察了样品表面形貌及断裂行为.结果表明:采用SPS烧结,可以在较低的温度下实现93W-5.6Ni-1.4Fe高比重合金的固相烧结,使合金致密化,并能有效控制钨晶粒长大,提高材料的硬度、抗弯强度等力学性能.
|
| 关 键 词： | 钨合金 放电等离子烧结 烧结性能 力学性能 微观组织 |
| 收稿时间： | 2006-10-15 |
| 修稿时间： | 2006-12-10 |
Spark plasma sintering behavior of W-Ni-Fe cemented carbide powders |
| |
| MEI Xuezhen, JIA Chengchang, YIN Fazhang, CHEN Liliang. Spark plasma sintering behavior of W-Ni-Fe cemented carbide powders[J]. Chinese Journal of Engineering, 2007, 29(5): 475-478. DOI: 10.13374/j.issn1001-053x.2007.05.007 |
| |
| Authors: | MEI Xuezhen JIA Chengchang YIN Fazhang CHEN Liliang |
| |
| Abstract: | 93W-5.6Ni-1.4Fe cemented carbides were sintered by spark plasma sintering method, in which the sintering temperature ranged from 1100℃ to 1180℃ and the holding time was 5 min. The properties such as density, hardness and bending strength of the samples sintered at different temperatures were tested, and field spray scanning electron microscopy was used to investigate their appearance and rupture behavior. The results showed that 93W-5.6Ni-1.4Fe cemented carbides with high density were sintered by SPS at low temperature. Besides grain size could be controlled, the hardness and the bending strength could also be improved. |
| |
| Keywords: | tungsten alloys spark plasma sintering sintering property mechanical properties microstructure |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《工程科学学报》浏览原始摘要信息 |
|
点击此处可从《工程科学学报》下载全文 |
|
