| 四面抽芯塑件的注射模设计 |
| |
| 引用本文： | 黄晨华. 四面抽芯塑件的注射模设计[J]. 模具制造, 2005, 0(10): 42-44 |
| |
| 作者姓名： | 黄晨华 |
| |
| 作者单位： | 韶关学院机电系,广东,韶关,512005 |
| |
| 摘 要： | 分析了塑件的成型工艺，设计了1模4腔、四面抽芯的注射模结构，巧妙地把侧抽芯机构和顶出机构设计成一个机构，有效地克服了由于空间狭小而造成内抽芯的困难。试生产证明，该设计是有效的。
|
| 关 键 词： | 1模4腔 侧抽芯 注射模 |
Design of Injection Mold for the Plastic Parts with Four Sides Core-Drawing |
| |
| Huang Chenhua. Design of Injection Mold for the Plastic Parts with Four Sides Core-Drawing[J]. Die & Mould Manufacture, 2005, 0(10): 42-44 |
| |
| Authors: | Huang Chenhua |
| |
| Affiliation: | Huang Chenhua |
| |
| Abstract: | The forming process of plastic parts is analyzed, and the injection mold mechanism of one mold with four cavities and four sides core-drawing is designed, side core-drawing mechanism and ejector mechanism are subtly designed into one mechanism, which effectively overcomes the difficulties of inner core-drawing caused by small spaces. Whilst, the testing manufacture shows the design is effective. |
| |
| Keywords: | one mold with four cavities side core-drawing injection mold |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
