| 地铁弯道曲率半径对钢轨磨损的影响 |
| |
| 引用本文： | 钟雯,张琬茂,刘斯俊,董霖.地铁弯道曲率半径对钢轨磨损的影响[J].西华大学学报(自然科学版),2013(5):67-69. |
| |
| 作者姓名： | 钟雯 张琬茂 刘斯俊 董霖 |
| |
| 作者单位： | 西华大学机械工程与自动化学院 |
| |
| 基金项目： | 国家自然科学基金青年科学基金项目(51005188);国家重点基础研究发展计划(973计划)(2007CB714702);四川省杰出青年学术技术带头人培育计划项目(2011JQ0039);四川省教育厅自然科学项目(11ZB006);西华大学重点科研基金项目(Z1120224);重点实验室开放研究基金资助项目(Szjj2012-025) |
| |
| 摘 要： | 根据赫兹接触理论,在JD—1型轮轨模拟试验机上通过改变钢轨曲率半径研究了曲线半径对地铁钢轨磨损的影响。实验结果表明:随着曲率半径的减小,钢轨磨损量增大,磨损深度和宽度均有所增加;钢轨曲率半径较小时,轮轨间存在蠕滑行为,钢轨承受的横向水平力和摩擦力均增大,这将导致钢轨接触面产生严重的塑性变形和表面硬化。
|
| 关 键 词： | 地铁 磨损 曲率半径 塑性流变 |
Effect of the Curvature Radius of a Subway Corner on Wear of Rail |
| |
| ZHONG Wen;ZHANG Wan-mao;LIU Si-jun;DONG Lin.Effect of the Curvature Radius of a Subway Corner on Wear of Rail[J].Journal of Xihua University:Natural Science Edition,2013(5):67-69. |
| |
| Authors: | ZHONG Wen;ZHANG Wan-mao;LIU Si-jun;DONG Lin |
| |
| Affiliation: | ZHONG Wen;ZHANG Wan-mao;LIU Si-jun;DONG Lin;School of Mechanical Engineering and Automation,Xihua University; |
| |
| Abstract: | The effect of the curvature raidus of a subway corner on the rolling contact fatigue properties of subway rails was investi- gated in detail without any lubricant by using JD--1 wheel/rail tribological simulation facility. The results indicate that with the de- crease in the radius of curvature, the wear amount of the rail increases and the wear depth and width increase as well. When the radius of the curvature of rails is small, creeping slip exsits between a wheel and rail. Also, the horizontal and frictional force that the rails withstanded increases. Therefore, severe plastic deformation and surface hardening on the contact surface of the rail take place . |
| |
| Keywords: | subway wear curve radius plastic flow |
| 本文献已被 CNKI 维普 等数据库收录！ |
