首页 | 本学科首页   官方微博 | 高级检索  
     

一种新颖的永磁同步电动机无位置传感器技术
引用本文:李槐树,赖延辉,张成胜.一种新颖的永磁同步电动机无位置传感器技术[J].电机与控制学报,2007,11(5):445-449.
作者姓名:李槐树  赖延辉  张成胜
作者单位:海军工程大学,电气与信息工程学院,湖北,武汉,430033
基金项目:国家自然科学基金委创新研究群体科研项目
摘    要:无位置传感器技术是永磁同步电动机调速系统的一个发展方向.本文剖析了已有的两种典型直接估算方法,提出了一种新颖的无位置传感器技术.通过分别计算出定子磁链矢量角位移与转矩角,将后者从前者中减去得到转子磁链矢量的角位移进而得到转子速度信号,并采用改进积分器取代传统的积分器.该技术能有效地改善磁链原点漂移,提高直接转矩控制系统的磁链角位移与转速的求解准确度.仿真及实验研究结果表明,采用这种无位置传感器技术的永磁同步电动机调速系统,具有良好的调速控制性能.

关 键 词:永磁同步电动机  无位置传感器  直接转矩控制
文章编号:1007-449X(2007)05-0445-05
修稿时间:2006-09-11

Novel sensorless technique for permanent magnet synchronous motor
LI Huai-shu,LAI Yan-hui,ZANG Cheng-sheng.Novel sensorless technique for permanent magnet synchronous motor[J].Electric Machines and Control,2007,11(5):445-449.
Authors:LI Huai-shu  LAI Yan-hui  ZANG Cheng-sheng
Affiliation:Naval University of Engineering, Wuhan 430033, China
Abstract:Two typical direct estimation methods of speed and rotor position are analyzed,and a novel sensorless technique in PMSM direct torque control(DTC) system is put forward in this paper.By calculating stator flux angle and torque angle,then subtracting torque angle from stator flux angle to obtain the rotor position and velocity,and using improved integrator instead of traditional one,this novel technique can restrain origin drift and improve estimation accuracy of speed and rotor position in DTC system.The result of simulation and test shows that good control performance can be obtained in PMSM DTC system by using this new technique.
Keywords:permanent magnet synchronous motor  position sensorless  direct torque control
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号