连接压力对管道瞬时液相连接接头组织性能的影响 |
| |
引用本文: | 梁峰,陈思杰,郭世敬. 连接压力对管道瞬时液相连接接头组织性能的影响[J]. 热加工工艺, 2009, 38(21) |
| |
作者姓名: | 梁峰 陈思杰 郭世敬 |
| |
作者单位: | 河南理工大学,材料科学与工程学院,河南,焦作,454000 |
| |
摘 要: | 把锅炉用20钢管在开放式管道瞬时液相扩散焊机上进行连接,采用氩气保护,焊接温度1180℃、保温时间3min、中间层材料选用非晶箔BNi2,通过改变连接压力,研究其对连接接头组织性能的影响.结果表明,当连接压力为4MPa时,所得连接接头的性能良好,满足要求.
|
关 键 词: | 20钢管 TLP连接 连接压力 |
Effect of Bonding Pressure on Microstructure and Properties of TLP Joint of 20 Steel Pipes |
| |
Abstract: | When the welding temperature is 1180℃, holding time is 3 min, bonding was carried out using BNi2 as interlayer in an argon atmosphere. The effect of welding pressure on the microstructure and mechanical properties of TLP bonding joint were studied. The element distribution of the joints was examined. The result shows that the best welding pressure parameters of TLP of 20 steel pipes is 4 MPa. |
| |
Keywords: | 20 steel pipes TLP bonding welding pressure |
本文献已被 万方数据 等数据库收录! |
|