| 基于ObjectARX的弧面分度凸轮机构参数化设计系统的研究 |
| |
| 引用本文： | 王琳芳.基于ObjectARX的弧面分度凸轮机构参数化设计系统的研究[J].机械,2007,34(4):30-32,39. |
| |
| 作者姓名： | 王琳芳 |
| |
| 作者单位： | 徐州广播电视大学,电子信息工程系,江苏,徐州,221006 |
| |
| 摘 要： | 弧面分度凸轮机构是一种高速、高精度的空间分度机构,由于其工作廓面比较复杂,给设计带来了很大的难度.基于ObjectARX技术通过对AutoCAD软件的二次开发,开发了弧面分度凸轮机构参数化设计系统,实现了弧面分度凸轮机构的参数化设计、造型、压力角和诱导主曲率的分析等功能,为弧面分度凸轮机构的设计提供了软件平台.
|
| 关 键 词： | ObjectARX 弧面分度凸轮机构 参数化设计 ObjectARX 分度凸轮机构 参数化 设计系统 研究 based cam mechanism indexing design system 软件平台 功能 分析 诱导主曲率 压力角 造型 化设计 二次开发 AutoCAD 比较 工作廓面 |
| 文章编号： | 1006-0316（2007）04-0030-04 |
| 修稿时间： | 2006-10-10 |
Study of parameterized design system of globoid indexing cam mechanism based on ObjectARX |
| |
| WANG Lin-fang.Study of parameterized design system of globoid indexing cam mechanism based on ObjectARX[J].Machinery,2007,34(4):30-32,39. |
| |
| Authors: | WANG Lin-fang |
| |
| Affiliation: | Xuzhou Radio and TV University, Xuzhou 221006, China |
| |
| Abstract: | Globoid indexing cam mechanism is a kind of mechanism high speed and high accuracy spatial indexing mechanism.Yet due to the cam's complicated working profile is complex,bring on its design is more difficult.Based on ObjectARX,by a secondary development upon AutoCAD software was carried out,so as to establish the designing system with contents of parameterized design,modeling and pressure angle of cam,induced main curvature analysis etc.,thus provide a software platform for design of globoid indexing cam mechanism. |
| |
| Keywords: | ObjectARX globoid indexing cam mechanism parameterized design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
