| 钢筋滚轧直螺纹套筒连接性能试验研究 |
| |
| 引用本文： | 邢怀念,张小鹏,刘增利,葛飞. 钢筋滚轧直螺纹套筒连接性能试验研究[J]. 工业建筑, 2009, 0(Z1) |
| |
| 作者姓名： | 邢怀念 张小鹏 刘增利 葛飞 |
| |
| 作者单位： | 大连理工大学工程力学系; |
| |
| 摘 要： | 采用英制460 MPa钢筋,对剥肋滚轧和直接滚轧直螺纹套筒接头进行一系列静载、动载试验研究。结果表明:直螺纹接头能够达到等强连接,剥肋滚轧直螺纹接头的变形性能优越于直接滚轧直螺纹接头;直螺纹接头性能等级能达到JGJ 107-2003Ⅰ级接头要求;在应力比为0.2的疲劳荷载下,英制460 MPa钢筋剥肋滚轧直螺纹接头的疲劳强度设计值可取为207 MPa。
|
| 关 键 词： | 钢筋机械连接 直螺纹 套筒 力学行为 疲劳 |
EXPERIMENTAL STUDY ON THE PROPERTIES OF REBAR PARALLEL THREAD SLEEVE JOINT |
| |
| Xing Huainian Zhang Xiaopeng Liu Zengli Ge Fei. EXPERIMENTAL STUDY ON THE PROPERTIES OF REBAR PARALLEL THREAD SLEEVE JOINT[J]. Industrial Construction, 2009, 0(Z1) |
| |
| Authors: | Xing Huainian Zhang Xiaopeng Liu Zengli Ge Fei |
| |
| Affiliation: | Department of Engineering Mechanics;Dalian University of Technology;Dalian 116024;China |
| |
| Abstract: | A lot of static and dynamic load tests have been done on BS460 MPa rebar parallel thread sleeve joints,which are direct-rolled joints and unribbed-rolled joints.The test results show that the strength of rebar parallel thread joints is up to that the rebar.Unribbed-rolled joints are better than direct-rolled joints in deformation.The properties of parallel thread joints can meet the requirements of JGJ 107-2003 I level joint.The design value of fatigue strength is 207 MPa for BS460MPa rebar unribbed-rolled ... |
| |
| Keywords: | rebar mechanical splicing parallel thread sleeve mechanical behavior fatigue |
| 本文献已被 CNKI 等数据库收录！ |
