|
|||||
|
|
| 水平V型砧连续拔长工艺的数值模拟 | |
| 引用本文： | 张莉萍,倪利勇,刘助柏,王贵. 水平V型砧连续拔长工艺的数值模拟[J]. 机械设计与制造, 2009, 0(7) |
| 作者姓名： | 张莉萍 倪利勇 刘助柏 王贵 |
| 作者单位： | 1. 邢台职业技术学院机电系,邢台,054035 2. 广东海洋大学工程学院,湛江,524088;燕山大学机械工程学院,秦皇岛,066004 3. 燕山大学机械工程学院,秦皇岛,066004 4. 广东海洋大学工程学院,湛江,524088 |
| 基金项目： | 国家自然科学基金，广东省自然科学基金，广东海洋大学博士科研基金 |
| 摘 要： | 对水平V型砧锻造法进行了连续拔长过程的数值模拟.以前的研究仅仅给出了单次压下拔长模拟结果,忽略了上一次压下所产生的变形对后续压下的影响,采用ANSYS有限元分析软件对水平V型砧锻造法实现了矩形截面毛坯连续拔长过程的数值模拟,分析了锻件横截面上的中心轴线横向应力分布. |
| 关 键 词： | 锻造 平砧 拔长 数值模拟 横向应力 |
Numerical simulation of continuous stretching with horizontal v-shaped anvils |
|
| ZHANG Li-ping,NI Li-yong,LIU Zhu-bai,WANG Gui. Numerical simulation of continuous stretching with horizontal v-shaped anvils[J]. Machinery Design & Manufacture, 2009, 0(7) | |
| Authors: | ZHANG Li-ping NI Li-yong LIU Zhu-bai WANG Gui |
| Affiliation: | 1Mechanical and Electronic Faculty;Xingtai Vocational Institute of Technology;Xingtai 054035;China;2College of Engineering;Guangdong Ocean University;Zhanjiang 524088;China;3College of Mechanical Engineering;Yanshan University;Qinhuangdao 066004;China |
| Abstract: | Numerical simulation is conducted for the continuous stretching with horizontal V-shaped anvils.The foregoing research gave the simulation results of single blowing during stretching,and failed to pay attention to the influence of the deformation,resulting from the previous blowing,upon the next blowing.ANSYS software is adopted to simulate the through continuous blowing for billets with rectangular crosssection using the horizontal V-shaped anvils.The transversal stress distribution along the central axis ... |
| Keywords: | Forging Flat anvil Stretching Numerical simulation Transversal stress |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |